Filter
Top Products
Aiphone KB Series 13710 (28 13 00) - 3
Specifier Notes: List standards referenced in this section, complete with designations and titles. This
article does not require compliance with standards, but is merely a listing of those used.
A. ISO 9001:2000 – Quality Management Systems – Requirements.
1.4 SYSTEM DESCRIPTION
Specifier Notes: Edit the system description and system operation as required for the project. Consult
Aiphone Corporation for more information.
A. System Description: Audio-video entry security intercom system supporting a maximum of 3
color video door stations and a maximum of 5 room stations with monitor with tilt camera
control.
B. Door Station Call-In:
1. Press CALL button at a door station.
2. At all room stations, chime tone sounds and image comes on.
3. Move door station camera with TILT control button, if necessary.
4. Lift handset on any room station.
5. When finished, replace handset. Image turns off.
6. Calling Inside with Direct Voice:
a. Momentarily depress CALL button on door station.
b. Speak toward video door station. After chime tone sounds, start speaking.
c. Inside room, after chime tone sounds and monitor shows image, outside voice audio
is heard.
C. Monitoring Door Station:
1. While in standby, press MONITOR button.
2. Both audio and image of door station 1 turn on for approximately 30 seconds.
3. Move door station camera vertically, pressing either top or bottom edge of TILT control
button.
4. Press MONITOR button to view door station 2.
5. Press MONITOR button third time to view door station 3.
6. Press MONITOR button to end monitoring.
7. When Another Room Station Calls-In During Monitoring:
a. View and hear door stations 1 to 3 hands free.
b. Room call-in starts with pre-tone, double tone for selective call or single tone for all
call, ending monitoring mode.
c. Lift handset to connect with calling room station.
8. When Another Door Station Calls-In During Monitoring:
a. While one door station is being viewed on monitor, another door station calls in.
b. When door station calls, chime is heard, and image changes to that of calling door
station.
c. Lift handset to reply to door station.
D. Internal Communication:
1. Calling by Selective Call:
a. Lift handset and press a station selector button. ALL CALL button turns on.
b. Call by voice and communicate when called person replies hands free.
2. Calling by All Call: