Filter
Top Products
Chapter 5. Configuration Menu
61202076L1-1 TSU 600 User Manual 5-9
Unit Menu
The Unit menu changes the baud rate of the Chain-In port and the setup
of the Chain-Out port. The menu items are:
Ctl Port
Rate
Sets the baud rate for communication with the
PC or modem.
Choices: 1200, 2400, 9600, 19200 and 38400 kbps
Traps Enables or disables the transmission of trap mes-
sages.
Choices: Enable, Disable
Access Sets the method of connection from the TSU 600
to T-Watch PRO/SNMP.
Choices:
Direct - Used if connected directly to the PC
Dial - Used when connection is through a
modem. The dial string is entered from T-Watch
PRO/SNMP.
Init Modem Allows you to choose an industry standard or a
custom initialization string for a modem con-
nected to the control port.
Control Port Selects the TCP/IP physical interface.
Choices: SLIP using the EIA-232 serial port or
10BaseT Ethernet (600e only).
If this option is set to SLIP, the Chain-In port
may not be used as a terminal interface.
IP Address Uniquely identifies the TSU 600 on a TCP/IP
network. This address is composed of four deci-
mal numbers, each in the range of 0 to 255, sepa-
rated by periods.