Actiontec electronic UP101 IP Phone User Manual


 
14
Actiontec VoSKY Internet Phone Wizard User Manual
Single-Line Connection with Dial-Up Modem
If the computer is connected to the Internet via dial-up modem
with no other phone line in the home, IPW can only be set up in
Single-Line mode.
To connect IPW in Single-Line mode with a dial-up modem:
1. Get the phone cable from the telephone and insert one end in
the “Phone” port on the rear panel of IPW.
2. Connect the other end of the phone cable to the telephone.
3. Optional: To make and receive normal calls while the computer
is powered down, use the supplied phone cable and insert one
end of the cable in the “Line” port on the rear panel of IPW.
4. Optional: Insert the other end of the phone cable in the
“Phone” port of the dial-up modem. The components should be
connected similarly to the gure below:
Dual-Line Connection
When IPW is set up in Dual-Line mode, it can make and receive
both Internet (computer-to-computer) calls and regular (comput-
er-to-land-line telephone or computer-to-mobile telephone) calls.
This procedure assumes the computer is connected to a cable
modem. If the computer is connected to the Internet via DSL mo-
dem, see “Dual-Line Connection with DSL Modem” on page 16.
Internet Phone Wizard
Phone W