Filter
Top Products
13
Actiontec VoSKY Internet Phone Wizard User Manual
Connecting Internet
Phone Wizard Hardware
3
This chapter explains how to physically connect IPW to a tele-
phone and phone line. There are two basic ways to connect IPW:
Single-Line or Dual-Line.
Caution: Make sure the IPW is not connected to the
computer until instructed to do so by IPW installation
program (see chapter 4, “Installing IPW Software”).
Single-Line Connection
When IPW is in Single-Line mode, it can be used to make or re-
ceive Internet (computer-to-computer) phone calls using Skype
only. It cannot make regular calls to regular (land-line or mobile)
telephones while in Single-Line mode.
To connect IPW in Single-Line mode:
1. Get the phone cable from the telephone and insert one end in
the “Phone” port on the rear panel of IPW.
2. Connect the other end of the phone cable to the telephone. The
components should be connected similarly to the gure below:
IPW is connected in Single-Line mode. Next, go to chapter 4, “In-
stalling IPW Software”.
Internet Phone Wizard
Phone W