Filter
Top Products
- 8 -
USING THE HEADSET
The BE-100HT is supplied with a high quality microphone to
provide clear voice communications. The boom microphone can
be swiveled to position so the headset can be used on either ear.
See Figure 4
OPERATION
1. Place the headband over
your head with the speaker
on the ear of your
preference.
2. With one hand grasp and
hold the ear cushion.
Carefully pull the boom
microphone down and into
position so that the
microphone is in front or
slightly to the side of your
mouth.
3. The boom that holds the
microphone is flexible. It
can be bent to position the
boom microphone so that it
is approximately 1 inch
from your mouth.
4. Do not twist the
microphone on the end of
the boom as this may
damage the internal wiring.
5. For your safety, use the
clothing clip to secure the
cord to your lapel or collar.
Figure 4
Cushioned
Speaker
Clothing Clip
Modular Plug
Microphone
Stablizer
T-Bar