Filter
Top Products
- 7 -
INSTALLING YOUR HEADSET TELEPHONE
The BE-100HT is a complete telephone and can be used in the
same manner as any single line telephone. See Figure 3
1. Insert the plug from the headset cord into the modular jack
marked HEADSET on the left side of the BE-100HT.
2. Plug one end of the supplied telephone line cord into the
modular jack marked LINE on the top side of the BE-100HT.
3. Plug the remaining end of the modular telephone line cord into
any existing RJ-11C modular wall jack.
IMPORTANT: AFTER INSTALLING YOUR BE-100HT
TELEPHONE, IT IS NECESSARY TO WAIT 10 SECONDS FOR
IT TO INITIALIZE PRIOR TO USING IT FOR THE FIRST TIME.
INSTALLATION
Figure 3
RJ-11C