Filter
Top Products
6
Basic Installation
6. Attach the cords to the telephone stand 7. Mount the telephone on the wall
Route the cords along the groove on the
telephone stand as shown in the illustra-
tion.
It is recommended that you use a wall-
mounting plate which is available
through your telephone company or a
local retailer. You will Þnd it easier to
wall-mount the telephone if you pur-
chase one or two short 20 cm (8”) tele-
phone cords and use them in place of the
long telephone cord(s).
Coil the telephone cord(s) into the space
provided on the back of the telephone.
Line up the keys on the wall mounting
plate with the key holes on the back of
the telephone. Place the telephone onto
the wall mounting plate, and then push
down to secure the telephone into place.
8. Insert the number card on your
telephone
9. Insert the Memory key card on your telephone
Write your telephone number on
the number card.
Place the number card into the
slot underneath the handset cra-
dle on the on the telephone.
Gently bend the clear plastic lens
and place it on top of the number
card in the slot.
This card contains the feature names for the dedi-
cated keys and label identiÞcation spaces for the
eight programmable memory keys.
Place the card into the memory key card slot on
the telephone.
Gently bend the clear plastic lens and place it on
top of the memory key card in the slot.
For more information on programming memory
keys, refer to
Memory keys on page 21