Filter
Top Products
25
Speed Dial Memory
There are 4 memory keys (M0-M3) for storing frequently used numbers.
The number card is intended for noting the name.
Save telephone number
1. Place the handset on the phone
2. Press one memory key (M0 to M3)
3. Press
and enter the number to be saved
4. Press
key again to complete saving
Note
: For some rare conditions it may be useful to insert a pause between
e.g. the area code and the phone number. To do this; enter the area code,
press the pause key and then continue with the telephone number.
Dial from a Memory
1. Pick up the handset
2. Press the memory key (M0 to M3) to be dialed
Delete/ Change a saved number
There is no special delete or change procedure. Instead the “save
procedure” is used.
1. To delete a number
Follow the Save procedure starting with step 1 but do not enter a
new number in the 3
rd
step. In this way you “save no number”
which will clear the memory in step 4.
2. To change a stored number
Follow the Save procedure and enter a new number in step 3 and
finish the save procedure in step 4. In this way the previous
number will be replaced.