Filter
Top Products
Configuring Softkeys
60 41-001524-00 REV00 – 04.2014
Softkey Display Behavior
On the 6867i IP phone, you can configure up to 20 (left) and 18 (bottom) functions on the softkeys. If you have no
softkeys configured on the IP phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the
key functions automatically appear in the first available position on the LCD display.
For example, if left softkeys 1 through 20 are set to None, and you set the left softkey 12 as the following:
Type: Speed Dial
Label: Home
Value: 3456
after saving the settings, the “Home” label actually appears in position 1 of the LCD.
A softkey function of None does not display on the Home screen at all.
The following figures illustrate the above scenario (i.e. the configuration of left softkey 12) and how it is displayed on the
phone:
Aastra Web UI Configuration
Corresponding 6867i Display