Filter
Top Products
Model 6757i CT RP Phone Installation Guide 25
Customizing your 6757i CT RP Base Unit
Contrast Level
Use these options to set the preference of contrast level and backlight for
your phone.
• Contrast Level
Use the Change softkey to cycle through eight contrast settings, which
brighten or darken the display.
• Backlight
Use the Change softkey to cycle through different backlighting options of
OFF, ON, or Auto. Auto backlighting sets the phone to turn off the
backlighting after a period of inactivity; the idle period is user definable
under the Advanced softkey when you select the Auto option. The
backlight is turned on with a key press or state change on the phone.
Live Dialpad*
This option turns the Live Dial Pad mode ON or OFF. With live dial pad
ON, the 6757i CT RP phone automatically dials out and turns ON
Handsfree mode as soon as a dial pad key or softkey is pressed. With live
dial pad OFF, if you dial a number while the phone is on-hook, lifting the
receiver or pressing the initiates a call to that number. Press the
Change softkey to turn ON or OFF the dial pad mode.
*Availability of feature dependant on your phone system or service provider.
Set Audio
The 6757i CT RP allows you to use a handset, a headset, or handsfree to
handle incoming and outgoing calls. The audio mode option provides
different combinations of these three methods to provide maximum
flexibility in handling calls. There are four audio mode options to choose
from:
Audio Mode Option Description
Speaker This is the default setting. Calls can be made or
received using the handset or handsfree
speakerphone. In handset audio mode, pressing
the button on the phone switches to
handsfree speakerphone. In Speaker audio mode,
lift the handset to switch to the handset.
Headset Choose this setting if you want to make or receive
all calls using a handset or headset. Calls can be
switched from the handset to headset by pressing
the button on the phone. To switch from the
headset to the handset, lift the handset.
Speaker/Headset Incoming calls are sent to the handsfree
speakerphone first when the button is
pressed. By pressing the button again, you can
switch back and forth between the handsfree
speakerphone and the headset. At anytime, lifting
the handset switches back to the handset from
either the handsfree speakerphone or the headset.