Filter
Top Products
Model 470 User Guide
15
Softkey Memory
Assigning a Redial List Entry to
a Speed Dial softkey
1. Scroll through the Redial List to
display the entry you want to
place in a Speed Dial softkey.
2. Press ˘.
3. Press s until the desired
Speed Dial Page is reached
with a vacant button
4. Press the Speed Dial softkey.
Note: If the Speed Dial softkey
already has an entry, the old
entry will be replaced by the
new. The old entry will not be
erased as a copy is still in the
directory. That copy can be
assigned to another vacant
button if desired.
Assigning a Directory Entry to a
Speed Dial softkey
1. Scroll through the Directory to
display the entry you want to
place in a Speed Dial softkey.
2. Press Assign (second softkey
on left).
3. Press s until the desired
Speed Dial Page is reached
with a vacant button
4. Press the Speed Dial softkey.
Note: If the Speed Dial softkey
already has an entry, the old
entry will be replaced by the
new. The old entry will not be
erased as a copy is still in the
directory. That copy can be
assigned to another vacant
button if desired.
Moving a Speed Dial Entry to a
different blank Button
This process requires [A] Removing
the entry from the first Speed Dial
softkey and [B] Assigning it to the
new softkey.
[A] Removing the Speed Dial entry
1. Press the Directory button c.
2. Press the s to scroll through
the list or press the first letter of
the name to locate the entry to
be removed.
3. Press Remove (second softkey
on left).
[B] Assigning a Directory Entry to
the New Speed Dial softkey.
4. Now scroll through the
Directory or press the first letter
of the name to display the entry
you want to Assign to the new
Speed Dial softkey.
5. Press Assign (second softkey
on left).
6. Press s until the desired
Speed Dial Page is reached .
7. Press the new Speed Dial
softkey.
Saving a feature and light to a
softkey button
You can make the set indicator light
come ON when you turn a feature
ON and go OFF when you turn that
same feature OFF. You can only do
this with one feature. This works
well with any service that has
separate ON and OFF codes such as
Call Forwarding. For example, you
may want the light to remind you
that you have turned Call
Forwarding ON.
To do this, use one Speed Dial
Memory softkey to turn the indicator
light ON when you activate the
feature. Use the second key to turn
the indicator light OFF when you
deactivate that same feature. The
following procedure shows you
how to program a FeatureLight ON
and OFF key.
470 E.book Page 15 Tuesday, October 12, 2004 10:43 AM