2Wire F-116 Two-Way Radio User Manual


 
Precautions
1-4
1.2.5 Disregarding this warning may cause bodily injury
(1) Be careful with the high temperature part.
The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to
cool down before disassembly.
(2)
Do not put nger or hair into the rotating parts.
When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor,
fan, etc.).
(3)
When you move the printer.
This printer weighs 8.9convert to lbs including toner cartridge and cassette. Use safe lifting and handling
techniques. Use the lifting handles located on each side of the machine. Back injury could be caused if
you do not lift carefully.
(4)
Ensure the printer is installed safely.
The printer weighs 8.9convert to lbs, ensure the printer is installed on a level surface, capable of
supporting its weight. Failure to do so could cause the printer to tip or fall possibly causing personal injury
or damaging the printer.
(5)
Do not install the printer on a sloping or unstable surface. After installation, double check that the printer
is stable.