24
Useful Features (Continued)
■ Saving broadcast TV channels in the memory
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CH-SETTING”, and press ENTER.
Press '/" to select “CH SEARCH”, and press ENTER.
EZ SETUP
AIR/CABLE CABLE 1
CH SEARCH
CH MEMORY
Press ENTER. The tuner will search through all available
channels in your area and add them to the TV memory.
A
•
To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
■ Adding weak or additional channels or erasing
unwanted channels from TV memory
Individual settings of programs can be adjusted.
Repeat steps 1 to 3 of Saving broadcast TV channels
in the memory.
Press '/" to select “CH MEMORY”, and press
ENTER.
EZ SETUP
AIR/CABLE CHANNEL AIR 2
CH SEARCH SKIP ON
CH MEMORY
Press '/" to move the cursor to “CHANNEL”, and use
\/| or Channel Select to select the desired channel to
be added or erased.
Press '/" to move the cursor to “SKIP”, and use \/|
to select “ON” or “OFF”.
Press MENU to exit.
A
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
4
2
5
3
SETUP
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press
'/"
to select the desired item, and press ENTER.
SETUP
OPTION
CH– SETTING
MTS
CLOCK
INPUT4 SELECT
V – CHIP BLOCK
CLOSED CAPTION
COLOR SYSTEM
PC SETTING
LANGUAGE
Press '/" to change the setting, and press ENTER.
Press MENU to exit.
1
3
Factory setting
[STEREO] Stereo audio
[IN]
INPUT4/OUTPUT
terminals selected as
input terminals
[ENGLISH]
Setting options
[SAP] Secondary
audio program
[MONO]Monophonic
audio
[OUT FAO]
Line output is selected,
output volume is fixed,
speaker output is
available.
[OUT VAO]
Line output is selected,
output volume is variable,
speaker output is mute.
[ESPAÑOL]
[FRANÇAIS]
Selected item
MTS
INPUT4 SELECT*
COLOR SYSTEM
LANGUAGE
TV mode: N358/PAL-M/PAL-N
INPUT mode: N358/N443/PAL/PAL-M/
(INPUT3/INPUT4)
PAL-N/SECAM/PAL60/AUTO
•
When the INPUT1/2 (COMPONENT) or INPUT5
(PC) mode is selected
, this function cannot be
set.
2
4
5
1
* “INPUT4 SELECT” cannot be set when “INPUT4” is selected in
“PC SOUND SELECT” in the AUDIO menu or in “WAKE-UP
TIMER” in the OPTION menu.
AA
AA
A
• For details about the following items, refer to each indicated page.
• CH-SETTING ....................... Pages 23 and 24
• CLOCK ................................. Pages 14 and 15
• V-CHIP BLOCK.................... Pages 25 to 28
• CLOSED CAPTION ............. Page 29
• PC SETTING........................ Page 34
• TV mode:
The LCD TV set is factory set to comply with the color system in
the United States (NTSC-N358).
For Brazil (PAL-M), Argentina (PAL-N) or Uruguay (PAL-N), adjust
the color system before using the LCD TV set.
4
5
1
2
3
LC-20B8U_E_P19-24.p65 05.2.3, 2:05 PM24
