RADSL Card Configuration
3-32
8000-A2-GB20-50
April 2000
Table 3-8. RTU Options
RTU Selection A-H-A
Displays RTU information such as RTU type, system, location, contact, model number,
serial number, version of firmware, and version of hardware.
Port # – Enter the RTU port number.
RTU Type – Model number of endpoint. For Model 8540, possible endpoints are
5246/5216. For Model 8546, possible endpoints are 5446r1/5446r2.
System Name – 16 alphanumeric characters. Name assigned to the RTU.
System Contact – 32 alphanumeric characters. Name or number of the person
responsible for the RTU.
System Location – 16 alphanumeric characters. Physical location of the RTU.
System Circuit ID – 32 alphanumeric characters. Circuit ID of the RTU.
Model Num* – Model number of card. (This field is read-only.)
Serial Num* – Serial number of card. (This field is read-only.)
Firmware Rev.* – Version of firmware. (This field is read-only.)
Hardware Rev.* – Version of hardware. (This field is read-only.)
CAP Rev* – Version of CAP Release. (This field is read-only.)
Reset RTU? – Yes/No. (This field will not appear if the RTU type is 5446r1 or 5446r2.)
RTU Selftest Result – The results of the RTU selftest, if supported by the RTU.
* If available, information in these fields is displayed.
