45
Receiving Faxes
JOG DIAL
AUTO ANSWER
SET
Display
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
FAX ONLY mode!
(all calls are received as faxes)
If the arrow (▼) is not shown on the right of the
display, turn it on by pressing .
●
The display will show the current number of rings
before the unit answers a call in the FAX ONLY
mode.
Display:
●
If necessary, rotate until the desired
ring count is displayed and press .
ON
●
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
▼
AFTER 3 RINGS
PICKUP & RCV FAX
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine is connected.
Activating the FAX ONLY mode
Note:
●
If the arrow (▼) is already shown on the right of the display and you wish to change the ring count, turn
the arrow off once then on again by pressing and follow the instructions above.
●
This mode should not be used with a telephone line which is used for both voice and fax calls. Fax
communication will be attempted even if someone is trying to call you.
