- 42 -
Cleaning Primary Filter
➢ It is recommended to clean filter with
cold water at least every three (3)
months. Check the primary filter
frequently and clean when dirty.
➢ Turn off and unplug the vacuum
cleaner.
➢ Remove dust bin (See EMPTYING
DUST BIN, p. 36).
➢ Pull the dust bin lid latch and open
the lid.
➢ Remove the primary filter.
➢ Wash with cold water only, DO NOT
use detergent or soap.
➢ Once the filter is washed clean,
squeeze by hand and allow to air dry.
➢ Allow filter to dry for 24 hours before
placing back into vacuum cleaner.
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction
to full power, replace the filter.
DO NOT operate without primary filter
installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
FILTER SCREEN
➢ Remove the filter screen.
➢ The filter CANNOT be washed as it
will lose its dust trapping ability.
➢ Remove the filter and clean by
tapping it on a firm surface.
