- 26 -
For best deep down cleaning, use the
“XLO” setting. However, you may
need to raise the height to make
some jobs easier, (such as throw
rugs and some deep pile carpets)
and to prevent the vacuum cleaner
from shutting off. Suggested settings
are: “XLO” - most carpets and bare
floors. “LO” - low to medium pile.
“MED” - medium to deep pile. “HI” -
shag; deep pile; scatter rugs.
➢ Lower wand from upright position
by pressing on the handle release
pedal.
➢ Return wands to upright position
for storage.
➢ Select a pile height setting by
pressing the small pedal on the
rear. The pile height setting is
shown in the window.
Handle Adjustments
Suggested Pile Height Settings
