11
Automatic dialing on the portable handset
Storing names and telephone
numbers in the search dial
Making a voice call using the
search dial
1 Press (Register).
●
“XXX” shows the remaining
station numbers you can store.
●
You can program up to 150
stations, including 5 pre-
programmed stations.
1 Press (Phonebook).
2 Enter the name, up to 12 characters (see the table on
page 9 for instructions).
3 Press (Register).
3Press (Talk) or press (Speakerphone).
4Enter the telephone number, up to 30 digits.
●
To correct a mistake, press (Clear).
5 Press (Register).
6If necessary, enter the group number (1–9).
7 Press (Register).
●
To program other items, repeat steps 2–7.
8 Press (Off) to exit the program.
Editing a stored name or number
3 Press (Edit).
4 Press .
●
If you do not need to edit the name, skip to step 6.
5 Edit the name (see the table on page 9 for
instructions).
6 Press (Register).
●
If you do not need to edit the telephone number,
skip to step 8.
7Enter the correct telephone number.
9If necessary, enter the correct group number.
10 Press (Register).
8 Press (Register).
●
If you do not need to change the group number,
skip to step 10.
1 Press (Phonebook).
2 Press repeatedly until the desired name is
displayed.
2 Press repeatedly until the desired name is
displayed.
