79
Cleaning
Document feeder!
1
Disconnect the mains lead and the
telephone line cord.
2
Open the front cover by pulling up the centre
part.
3
Clean the document feeder rollers and
rubber flap with a cloth moistened with
isopropyl rubbing alcohol, and let all parts
dry thoroughly.
4
Clean the glass with a soft and dry cloth.
5
Close the front cover securely.
6
Connect the mains lead and the telephone
line cord.
If misfeeding occurs frequently or if dirty patterns or black bands appear on a transmitted
document or on the original of a copied document, clean the document feeder.
Caution:
●
Do not use paper products, such as paper
towels or tissues, to clean the inside of the
unit.
Thermal head!
1
Disconnect the mains lead and the
telephone line cord.
2
Open the front cover by pulling up the centre
part.
3
Open the back cover by pushing the back
cover open button (green) or pushing the
back cover open lever (green).
4
Clean the thermal head with a cloth
moistened with isopropyl rubbing alcohol,
and let it dry thoroughly.
●
Do not touch the black sheets on the
thermal head.
5
Close the back cover securely by pushing
down on the dotted area at both ends. Close
the front cover securely.
6
Connect the mains lead and the telephone
line cord.
If dirty patterns or black or white bands appear on a copied or received document, check
whether there is dust on the thermal head and clean the thermal head to remove the dust.
Caution:
●
To prevent malfunction due to static
electricity, do not use a dry cloth and do not
touch the thermal head directly.
