34
4
Upon completion of the setting, release the search
button.
The item number now flashes.
OWhen the search dial is in the SHTL mode, the
item will move unless the dial is set to the center
position.
5
When other items are to be changed, repeat steps
2 to 4.
6
Press the SET button.
The changes are stored in the memory.
To disregard the new settings and restore the
old settings instead, press the RECORDER
button.
OTo return the setup contents to the factory
settings (initial settings), press the RESET button
while the menu is displayed. The following
message is displayed.
If the PLAY button is now pressed, the factory
settings are reinstated.
SETUP-MENU INIT SET
YES<PLAY>/NO<STOP>
Setup (initial settings)
1
Press the (SHIFT+RECORDER).
The setup menu screen appears on the LCD
monitor, and the setup menu item number appears
on the counter display.
Each time the FF button is pressed (for about 1.5
seconds), the item number and item name are
selected and displayed alternately.
(If a setup was performed previously, the screen on
which the last change was made is displayed.)
OThe setup menu screen is also displayed on the
TV monitor which has been connected to the
VIDEO OUT 3 connector or SDI OUT 3
connector.
MENU
3
At the position where the change is to be made,
turn the search dial while holding down the search
button.
The settings on the menu screen and display now
flash.
When the dial is turned clockwise, the setting
number is incremented; conversely, when it is
turned counterclockwise, it is decremented.
OAt this time, when the RESET button is pressed
while holding down the search button, the setting
value is returned to the factory setting.
2
Turn the search dial to select the item to be set.
The menu screen cursor (2) moves, and the item
number on the display flashes.
OWhen the dial is turned clockwise, the item
number is incremented from 001 5 002 5 003
5 004 and so on; conversely, when it is turned
counterclockwise, the item number is
decremented.
OWhen the FF button or REW button is pressed
while holding down the PLAY button, the next or
previous item is selected.
OWhenever possible, limit the use of the search
dial to the JOG mode.
This VTR’s main settings are performed while making
selections using a system of menus.
Changing the settings
