64
When a warning occurs in this unit, the error number
is indicated on the counter display.
Open the DIAG menu to display a description of the
error on the counter display or monitor TV.
When a operational malfunction has occurred in the
unit, the error number flashes on the counter display.
DIAG menu
This display the VTR information.
VTR information includes “WARNING” information,
serial number of the unit and “HOURS METER”
(usage time) information. A DIAG menu appears on
the monitor when the monitor is connected to the
VIDEO OUT 3/SDI OUT 3 connector on the connector
section.
$ Displaying the DIAG menu
Error messages
1
Press the DIAG button.
The DIAG menu screen is displayed on the
monitor, and the message is displayed on the
counter display.
2
The “WARNING” information and “HOURS
METER” information can be switched by pressing
the search button.
3
Press the DIAG button again to return to the
original display.
$ “WARNING” information display
OA warning message is displayed whenever a
warning occurs.
When warnings have not been detected, “NO
WARNING” is displayed.
OWhen multiple warning occur, the descriptions for
each warning can be checked by turning the search
dial.
