Kramer Electronics VP-770 Manual

A SERVICE OF

next previous

52

VP-770 - Controlling the VP-770

8.7 Controlling via the Infrared Remote Control Transmitter

This IR remote control transmitter is compatible with various Kramer

machines, therefore not all its buttons are applicable to the VP-770.

The table below defines only the buttons that are relevant to the

VP-770; the functionality of the other buttons is marked N/A.

Figure 32: Infrared Remote

Control Transmitter

Keys

Function

POWER

Toggle the power save mode ON or OFF

PIP

Enter the dual window mode (the latest

setting), see Section 7.2

Note that while browsing the OSD menu

in the dual window mode, a short press of

the PIP button will instantly toggle the

window control (between Main and PiP)

BLANK

Toggle between a blank screen, black

screen and the display (for both windows)

FREEZE

Freeze/unfreeze the output video image

(for both windows)

MAIN Source Inputs

HDMI1

Select the HDMI 1 input

HDMI2

Select the HDMI 2 input

DP

Select the DisplayPort input

PC1

Select the UXGA 1 input

PC2

Select the UXGA 2 input

SDI

N/A

CV1

Select the composite video 1 input

CV2

Select the composite video 2 input

YPbPr

Select the component video input

Press ENTER to access the menu levels

(when in the OSD)

Use the up and down arrows to adjust the

numerical values and to adjust the output

volume level (when not within the OSD)

MENU

Enter/Exit the OSD menu and return to

the previous menu level

MUTE

Toggle between muting (blocking out the

sound) and enabling the audio output

PIP Source Inputs

HDMI1

Select the HDMI1 input

HDMI2

Select the HDMI2 input

DP

Select the DisplayPort input

PC1

Select the UXGA 1 input

PC2

Select the UXGA 2 input

SDI

N/A

CV1

Select the composite video 1 input

CV2

Select the composite video 2 input

YPbPr

Select the component video input

LOCK

Lock the front panel buttons

RESET to

XGA/720P

Press and hold to reset to the default

resolution (toggles between RESET TO

XGA and 720p)

i