A SERVICE OF

logo

Operation / 操作
22 313483A
English
Spray With Air (Base Coat
Applicator)
1. Prepare material, page 17. Place
material hose in supply pail.
2. Turn on/off switch
OFF.
3. Remove cap
before installing
air line.
4. Turn air valve OFF.
Connect applicator to
material hose and air
hose. Air supply min-
imum requirement is
3.5 bar and 350
l/min.
中文
空气喷涂 (底色漆喷涂器)
1. 如第 17 页所述准备涂料。将料管
放入供料桶内。
2. 关断通 / 断开关。 3. 安装气路之前要卸
下帽子。
4. 关闭空气阀。将料
管和空气软管连接
到喷涂器上。最低供
气要求为 3.5 bar,
350 l/min。
ti4650a
ti10796b
ti13647a
ti13637a
ti13636a
NOTICE
DO NOT USE MATERIALS THAT
CURE RAPIDLY! Materials with a
fast curing time could plug the pump
hose, gun, or applicator.
注意
不要使用快速固化的涂料!快速固化
的涂料可能会堵塞泵、软管、喷枪或
喷涂器。