54
CALIBRATING THE
SYSTEM
Type Music Sub Cinema Sub 5.1 Sub Speakers
0 None Centre LFE All analogue.
1 Mono Mono Mono All analogue.
2 None Centre LFE All digital.
3 None None None All digital, large centre.
4 None Centre LFE Digital left, right, and centre.
5 None Centre LFE Digital left and right.
Resetting the configuration of the
Digital Surround Controller
The Digital Surround Controller provides several sets of standard settings,
called Types, which configure all aspects of the 861 into one of a number of
alternative standard configurations.
Types 0 to 5 are factory settings, designed to cater for the most commonly
needed configurations of associated equipment.
These standard Types are shown in the following table:
In this table Music Sub refers to a subwoofer used for all Music DSP presets,
Cinema Sub to a subwoofer used for all Cinema DSP presets, and 5.1 Sub to
a subwoofer used for all Discrete digital DSP presets.
In addition, your installer may have provided one or more named User
Types, with settings appropriate to the configuration of equipment when
your 861 was installed.
You can reset the configuration of the Digital Surround Controller to any
of these Types to restore it to the state it was in when it was installed. Note
that selecting a Type will clear any configuration and calibration changes
you have made, or any DSP presets you have defined.
If your Digital Surround Controller is fitted with a video card, and you have
a video source connected, the on-screen display also provides additional
text explaining about each Type. For information about setting up the on-
screen display refer to the 861 Reference Digital Surround Controller
System Guide.
