Remote Control, cont’d
RAC 104 • Remote Control
3 = group B, channel 3
4 = group B, channel 4
X3
= 0 or 1
0 = off
1 = on
X4
= 0 through 14, bass adjustment range
(+/-14 dB; 2 dB increment/decrement,
bass in dB = [bass number minus 7] times 2;
default = 7 [0 dB]).
X5
= 0 through 14, treble adjustment range
(+/-14 dB; 2 dB increment/decrement,
treble in dB = [treble number minus 7] times 2;
default = 7 [0 dB]).
X6
= Front panel executive modes
0 = off
1 = executive mode 1
2 = executive mode 2
X7
= Controller software version to second decimal place
X8
= A or B, group number
Group A = channels 1 and 2
Group B = channels 3 and 4
X9
= 1 through 3, preset number
X10
= -12 through +12 (audio gain or attenuation in dB)
X11
= 0 through 12 (audio gain in dB)
X12
= 1 through 12 (audio attenuation in dB)
X13
= 0 through 15, decimal number indicates settings for the
four input and output line level DIP switches. DIP
switch settings are shown in the table below.
X13
DIP
Switch Group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1 Input A Off Off Off Off Off Off Off Off On On On On On On On On
2 Input B Off Off Off Off On On On On Off Off Off Off On On On On
3 Output A Off Off On On Off Off On On Off Off On On Off Off On On
4 Output B Off On Off On Off On Off On Off On Off On Off On Off On
Off = -10 dBV (unbalanced, consumer level)
On = +4 dBu (balanced, pro level)
3-4
