![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/2b/82b306e7-9c54-03f4-2102-1074d1b4c745/82b306e7-9c54-03f4-2102-1074d1b4c745-bg19.png)
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
• Make detail settings for various parameters.
• With the AVR-688, settings and operations for most functions can be performed by operating while looking at the items displayed on the main
unit.
[Front]
[Rear]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
System Setup
1
Press SYSTEM SETUP, then press ENTER.
“System Setup” is displayed.
2
Press o p to select the item you want to set, then
press ENTER.
3
To change the setting:
Press ui to select the item you want to change, then
press o p to change the setting.
4
Press ENTER or i to conrm the new settings.
5
Press SYSTEM SETUP to move the next category.
b To cancel the system setup mode, press SYSTEM SETUP again.
Operations
The same operation is possible on the main unit or remote control
unit.
2
3
5
1
Setup