![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/f7/7f7e7808-4ff6-fea4-5121-d47386277c97/7f7e7808-4ff6-fea4-5121-d47386277c97-bg1a.png)
A0 Antenna Aiming
Adjust the XM radio reception sensitivity.
[Display]
Satellite
Indicate satellite signal strength.
Terrestrial
Indicate terrestrial signal strength.
Display Condition
Signal strength is strong
Signal strength is good
Signal strength is marginal
Signal strength is weak
No signal
a ~ d Volume Control
Set the main zone volume setting.
[Display]
Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
Option Setup
Make various other settings.
a ~ d Volume Control
f Auto Surround Mode
g Remote ID Setup
l Auto Preset Memory
Use the auto preset function to program radio stations.
[Display]
If an FM station cannot be preset automatically, select the desired
station by tuning it in manually, then preset it manually.
Press the o button to start.
• “CH” blinks on the display and searching begins.
• “Completed” appears once searching is completed.
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the main zone.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
Power On Level
This sets the volume set when the main zone’s power is turned on.
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
–80dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
Operations (vpage 19)
Getting Started Connections Setup Playback Remote Control Information Troubleshooting
ENGLISH