Cypress CY3640 USB Starter Kit
User’s Guide
Cypress Semiconductor Ver 0.993
Page 4
A. Contents of the CY3640 USB Starter Kit
1. Three CY7C63001 Cypress USB Controller devices (One pre-programmed windowed
controller on the CY3640 USB Thermometer Demo board, and two spare devices (one
windowed and one OTP)
2. One Cypress USB Programmer from HI-LO Systems with a wall power adapter, a serial cable
and programming software on a floppy disk
3. One CY3640 USB Starter Kit printed circuit board
4. One low-speed unshielded USB "A to B" Cable
5. One Cypress USB Starter Kit CD-ROM:
Software:
CYASM: Cypress USB controller assembler
USB Thermometer device assembly source code
USB Thermometer Windows application program executable code
USB Thermometer device driver
Documentation:
Cypress USB controller family datasheets
USB Thermometer User's Guide and Application Note: Designing a USB
Thermometer with the CY7C63001 USB Controller
USB Thermometer PC board layout and schematics
USB Specification v1.0
Cypress CYASM assembler manual
Cypress USB-related application notes
Cypress databook
6. Printed documentation:
USB Starter Kit User's Guide
USB Starter Kit Application Note
Registration card – Please fill it out and drop it in the mail
