Filter
Top Products
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2521-001 Rev. A Page 7 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
3.7 –Bend RF PCBA clip (up) and remove RF PCBA from main PCBA
3.8 –Disconnect RF cables from RF PCBA
Material removed (P/N
& material type)
Instruction visual
Painted metal enclosure;
chassis bottom
1769-001 - 22Ga. EG
w/powder coat (Interpon 700
-epoxy/polyester)
Insulator shields
1780-001 - Insulator,
31.3mm round, Mylar, 2 ea.
1767-001 - Insulator,
42x221mm, Mylar, 1 ea.
Material removed (P/N
& material type)
Instruction visual
Main PCBA
1724-001 - Printed circuit
assembly
Remove EMI shields
Bend clip up
Release connector, 2 sides
Remove RF PCBA
by pulling out