Filter
Top Products
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
disassemble this product,but take it to a
qualified serviceman when some service or
repair work is required. Opening or removing
cabinet parts other than specified access
doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can
cause electric shock when the appliance is
subsequently used. In addition, attempting to
service the unit yourself may void your
warranty.
11. Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electric shock.
12.
Unplug this product from the wall outlet and
refer servicing to qualified service
personnel under the following conditions:
a) When the power supply cord or plug is
damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain
or water.
d) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are
covered by the operating instructions
because improper adjustment of other
controls may result in damage and will
often require extensive work to restore
the product to normal operation.
e) If the product has been dropped and the
cabinet has been damaged.
f) If the product exhibits a distinct change
in performance.
13.Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric shock
from lighting.
14. Do not use the telephone to report a gas leak
in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
! This symbol is to alert you to important
operating or servicing instructions that may appear
in your owner’s manual. Always follow basic safety
precautions when using this product to reduce the
risk of injury, fire, or electric shock.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on the product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for
example, near a bath tub, kitchen sink, or
swimming pool).
5. Do not place this product on an unstable cart,
stand, or table. The product may fall, causing
serious damage to the product.
6. Slots and openings in the cabinet and the back
or bottom are provided for ventilation. To
protect it from overheating, these openings
must not be blocked by placing the product on
the bed, sofa, rug, or other similar surface.
This product should never be placed near or
over a radiator or heat register. This product
should not be placed in a built-in-installation
where proper ventilation is not provided.
7. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your dealer or
local power company.
8. Do not allow anything to rest on the power
cord. Do not locate this product where the cord
will be abused by persons walking on it.
9. Never push objects of any kind into this product
through cabinet slots as they may touch
dangerous voltage points or short out parts
that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.
10.To reduce the risk of electric shock, do not
Parts Check List:
1. Handset
2. Base Unit
3. Telephone line cord(clear tip)
4. AC adapter
5. Battery Pack
6. Wall mount bracket
7. Belt clip
2
3
THANK YOU FOR PURCHASING YOUR
VTECH
TELEPHONE. THE
VT9112
IS A 900MHZ
CORDLESS PHONE, WITH THE ADDED CONVENIENCE OF A LIQUID CRYSTAL DISPLAY
FOR CONVENIENT EXAMINATION OF PHONE NUMBERS.
FEATURES OF THE
VT9112
* 900 MHZ, analog operation
* 10 channels, with manual channel change (CHAN) key on Handset
* 12 Digit Liquid Crystal Display on Handset
* Headset Capability (with
optional
2.5mm headset)
* Line In Use indication on Handset Unit
* Page / Handset Locator function from Base Unit
* 20-bit Digital security coding between Handset and Base Unit to minimize the risk of
another cordless phone accessing your phone line
* 10 number
Memory Dialing with One Touch access
* Predialing function of 20 digits
* Multiple Redialing (4 buffers x 20 digits)
* 4 Programmable Handset Ringer Types (plus Ringer OFF)
* 3-Step Selectable Handset Volume (HI - MID - LO)
* 3-Step Battery Detection Level shown by LCD icons
* Maximum battery life is 7 hours of continuous talk or 7 days of standby on a full charge
* Handset
Easy Answer
feature
* Temporary Tone
dialing
* Flash Function
* Hearing Aid Compatibility
* Spare battery charging Compatibility
* Wall-mount Compatibility
While you are charging your
VT9112
for the first time, please read this
Instruction Manual
. By
being familiar with its operation and features, you will derive the maximum benefit from your
new telephone.
INTRODUCTION
TABLE OF CONTENTS
MULTIPLE REDIALING-----------------------12
MEMORY (SPEED) DIAL---------------------12
Programming a Speed Dial Number-------12
Replacing a Speed Dial Number------------12
Clearing a Speed Dial Number--------------12
Storing A Pause In A Speed Dial Number
-------------------------------------------------------12
Speed Number Dialing-------------------------13
LIVE DIALING & PREDIALING----------13
OPTIONAL:
HEADSET INSTALLATION
AND OPERATING INSTRUCTIONS-------13
INSTALLATION----------------------------------13
OPERATION--------------------------------------14
MAINTENANCE---------------------------------15
AUTOMATIC SECURITY CODING---------15
IN CASE OF DIFFICULTY--------------------16
WARRANTY STATEMENT-------------------18
TECHNICAL SPECIFICATIONS------------19
FCC & IC REGULATIONS--------------------20
INTRODUCTION-----------------------------1
PARTS CHECK LIST-----------------------2
IMPORTANT SAFETY
INSTRUCTIONS------------------------------3
REPLACING THE HANDSET BATTERY
PACK-----------------------------4
A WORD ABOUT RECHARGEABLE
BATTERIES-----------------------------------4
SPARE BATTERY CHARGING----------4
GETTING STARTED ----------------------5
SETTING UP YOUR
VT9112
------------5
WALL MOUNTING--------------------------6
HANDSET FEATURES----------------------7
HANDSET DIAGRAM----------------------7
HANDSET INDICATORS------------------7
FUNCTION KEYS----------------------------8
BASE UNIT FEATURES--------------------9
BASE DIAGRAM-----------------------------9
BASE INDICATORS------------------------9
FUNCTION KEYS---------------------------9
BASIC OPERATIONS------------------------9
HOW TO SET TONE/PULSE DIALING
----------------------------------------------------9
MAKING CALLS-----------------------------10
LIVE DIALING & PREDIALING----------10
ANSWERING CALLS---------------------10
DISCONNECTING CALLS--------------10
LINE IN USE---------------------------------10
PAGE/HANDSET LOCATOR-----------10
SETTING HANDSET VOLUME--------11
CHANGING CHANNELS----------------11
TEMPORARY TONE----------------------11
ADVANCED OPERATIONS-------------11
RINGER PROGRAMMING--------------11
Programming The Ringer Type---------11
Turning Off The Handset Ringer----------11
1
REPLACING THE HANDSET BATTERIES
1. Remove the battery cover by pressing on
the ridged lines and sliding downward.
2. Discard the old battery pack. Don't put the
old battery pack in a trash compactor or a
fire - it could burst.
IMPORTANT: Do not dispose of this battery
in household garbage. For
information on recycling or
proper disposal, consult your
local solid waste collection or
disposal organization.
3. Place the new battery pack in the battery
compartment. Make sure the metal
contacts on the underside of the battery are
aligned with charging contacts in battery
compartment.
4. Replace the battery cover by sliding it into
place.
5. The new battery pack must be charged
before using your telephone. Place the
handset in the cradle of the base unit to
allow it to charge for 24 hours. Maximum
battery life between charges is more than
7 hours of continuous talk time or 7 days of
standby.
A WORD ABOUT RECHARGEABLE
BATTERIES
1. Your NiCad battery pack recharges
whenever the Handset is returned to the
Base Unit.
2. To maximize the life of your battery pack,
do not return your
VT9112
Handset to the
Base Unit cradle for recharging until the
LCD indicates LOW BATTERY LEVEL.
CAUTION: To reduce the Risk of Fire or
Injury to Persons, Read and
Follow these instructions:
1. Use only VTECH battery.
2. Do not open or mutilate the battery.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
3. Exercise care in handling batteries in order
not to short the battery with conducting
materials such as rings, bracelets, and
keys. The battery or conductor may
overheat and cause burns.
4. Do not dispose of the battery in a fire. The
cell may explode.
SPARE BATTERY CHARGING
1. Spare Battery Compartment is provided
in the Base Unit for charging spare
battery.
2. Open the compartment door and place
the spare battery pack into the
compartment.
3. Make sure the metal contacts on the
underside of the battery are aligned with
charging contacts in the battery
compartment.
4. Then, close the battery cover tightly.
4
POWER
CHARGING
SPARE BATT
IN USE
PAGE
VT9112
WALL MOUNT
BRACKET
BATTERY PACK
BELT
BASE UNIT
TELEPHONE LINE
CORD
HANDSET
AC ADAPTER
Made in China 91-5044-11-00
POW
ER
CHARG
ING
SPARE BATT
IN USE
PAGE
VT9112