Filter
Top Products
5
Getting Started
Charging of the Handset Battery Cells
The Handset of your cordless telephone is powered by rechargeable battery cells. It
charges automatically whenever the Handset is in its charger or Base Unit.
You should charge the battery cells for at least 12 hours when you first
receive your phone. You’ll know the battery cells needs charging when:
• The low battery message and the icon are
displayed.
• The Handset seems completely dead, the LCD
is completely clear and does not activate when
you press the keys.
NOTE: When in LOW BATTERY mode, the keypad
sounds, backlighting and speakerphone features
will not work. When your battery cells have been
charged, your features will return to their normal
function.
LOW BATTERY
Setup
Installation and Charge of Battery Cells in Handset
1. Place the new battery cells in the
Handset with the positive and
negative poles aligned in the battery
compartment.
2. Replace the battery cover by sliding it
upwards
3. If the new battery cells are not already
charged, place the Handset in its
Charger or Base Unit, and allow it to
charge for 12 hours. After initial
charge, a maintenance charge of 8
hours should be sufficient.
2. Choose the location for your Handset Charger, and plug its power supply
into an electrical outlet.
WARNING: Alkaline batteries must NOT be used in your VT2650 cordless
telephone. Use only the batteries that came with your phone, or contact
our Customer Support Center to order additional batteries.