Filter
Top Products
To switch to another caller
1. Press FLASH button when you see the name
and/or number of a second caller.
2. Press FLASH button again to switch back to
first caller.
Repeat Calls
When you receive calls repeatedly from the
same caller, the display will show “RPT #”
adjacent to the call number of that call to indi-
cate it is a repeat call.
Reviewing Calls
1. The NEW CALL Indicator will flash to indi-
cate new calls or calls that have not yet been
reviewed.
2. Press < to review the next call.
3. Press > to review the previous call
4. After a new call is reviewed, it will be de-
ducted from the total number of new calls
displayed.
5. When the list of calls reaches the end, the
display will display “END OF LIST” and re-
turn to show the current Time and Date in 30
seconds.
Deleting Calls
A. To Delete an Individual Call
1. Press < or > buttons until the call to be de-
leted is displayed.
2. Press the DEL button twice within 1.5 sec-
onds.
3. The call is deleted and the total call count is
reduced by1.
B. To Delete All Calls
1. Press < or > buttons to enter the calls re-
ceived display.
2. Press and hold the DELETE Button for 4 sec-
onds until “NO CALL” is displayed.
3. All calls will be deleted and the total call count
returns to zero.
Dialing from Displayed Call
1. Press < or > buttons until the desired call is
displayed.
2. Pick up the Handset. When you hear the dial-
tone,press Dial.
Blocked or Unavailable Calls
1. If the caller’s telephone number is blocked
(that is, the caller wishes to keep his tele-
phone number private) the display will show
“UNAVAILABLE” in place of the caller name.
2. If the call is international or from an area where
Caller ID service is not available, the display
will show “OUT OF AREA” in place of the
caller’s name.
TELEPHONE MEMORY OPERATION
Note: We recommend that you disconnect
the phone line when programming your
telephone.
The Caller ID Telephone has 14 memory loca-
tions including Last Number Redial. Your phone
can store three phone numbers for one-touch
dialing, i.e., for emergency or frequently called
numbers. You can additionally store up to10
phone numbers for three-touch dialing. Each
phone number must be stored in a specific
memory location to enable your phone to lo-
cate a number from the memory for automatic
dialing. The one-touch memories are numbered
M1, M2and M3, while the 10 three-touch
memories are stored through the AUTO But-
ton and dialing keys(0-9).
Note: Each memory location can store up
to16 digits for the telephone number. If
the number to be stored exceeds 16 digits,
you should split storing of the number into
2 separate locations. This normally occurs
when an access code is required. In this
case, you can store the access code in
one of the one-touch memories and press
this button before dialing or accessing
other stored telephone numbers.
Storing a Phone Number in the One-Touch
Memory Locations
1. Dial the phone number using the Dialing Keys.
2. Press STORE Button once.
3. Press M1~M3 buttons as desired to store the
data.
TELEPHONE OPERATION
Recalling a Phone Number from the One-
Touch Memory Locations
1. Pick up the Handset
2. Press the M1,M2 or M3 Button where your
required number is stored.
3. Your call will now be dialed automatically.
EXAMPLE
To recall 7654321 which is stored in memory
location “ M1”, pick up the handset and wait
for a dial tone, then press the M1 button. The
number will be dialed automatically.
Storing Phone Numbers in the Three-Touch
Memory
1. Dial the phone number using the dial keys.
2. Press the STORE button.
3. Press AUTO button [- -] flashes in the LCD
display.
4. Enter any number from “10” to “19”.
Recalling Phone Number from Three-Touch
Memory
1. Pick up the Handset.
2. Press the AUTO button.
3. Press the location number 10,11,12 etc. where
your number is stored.
4. Your call will now be dialed automatically.
EXAMPLE
To recall 1234678 which stored in memory
location “10”, pick up the handset, wait for the
dial tone and then press AUTO (delete word),
then the keys [1][0]. The phone number will be
dialed automatically.
Copying Phone Numbers into the Memory
from the Caller ID List
1. Press < or > buttons to review the received
calls until the desired call is displayed.
2. Press STORE and M1, M2 or M3 Button. The
display will show “Number Stored.” If you
want to store the phone number into the One-
Touch Memory, press STORE then AUTO (de-
lete word) followed by any location from “10”
to “19” to store the phone number in (delete
word) Three-Touch Memory.
3. The display will show “NUMBER STORED” to
confirm.
Note: The previous phone number stored in a
memory location will be erased and replaced
by the new (delete word) number.
Limited Warranty
What does this limited warranty cover?
The manufacturer of this VTECH product,
VTECH Communications, warrants to the
holder of a valid proof of purchase (consumer”
or you”) that the product and all accessories
provided by VTECH in the sales package
(product”) are free from material defects in
material and workmanship, pursuant to the
following terms and conditions, when installed
and used normally and in accordance with
operation instructions. This limited warranty
extends only to the Consumer for Products
purchased and used in the United States of
America.
What will VTECH Communications do if
the Product is not free from material de-
fects in materials and workmanship dur-
ing the limited warranty period (materially
Defective Product”)?
During the limited warranty period, VTECH’s
authorized service representative will repair
or replace, at VTECH’s option, without charge,
a Materially Defective Product. If we repair this
product, we may use new or refurbished re-
placement parts. If we choose to replace this
product, we may replace it with a new or refur-
bished product of the same or similar design.
VTECH will return repaired or replacement
products to you in working condition.
VTECH will retain defective parts, modules, or
equipment. Repair or replacement of Product,
at VTECH’s option, is your exclusive remedy.
You should expect the repair or replacement
to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the product
extends for ONE (1) YEAR from the date of
purchase.
If we repair or replace a Materially Defective
Product under the terms of this limited war-
ranty, this limited warranty also applies to re-
paired or replacement. Products for a period
of either (a) 90 days from the date the re-
paired or replacement Product is shipped to
you or (b) the time remaining on the original
one-year limited warranty, whichever is
longer.
What is not covered by this limited war-
ranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water, or
other liquid intrusion;or
2. Product that has been damaged due to repair,
alteration, or modification by anyone other than
an authorized service representative of
VTECH; or
3. Product to the extent that the problem experi-
enced is caused by signal conditions, network
reliability or cable or antenna systems; or
4. Product to the extent that the problem is caused
by use with non-VTECH electrical accesso-
ries; or
5. Product whose warranty/quality stickers, Prod-
uct serial numbers plates or electronic serial
numbers have been removed, altered or ren-
dered illegible;or
6. Product purchased, used, serviced, or shipped
for repair from outside the United States, or
used for commercial or institutional purposes
(including but not limited to Products used for
rental purposes); or
7. Product returned without valid proof of pur-
chase (see 6 below);or
8. Charges for installation or set up, adjustment
of customer controls, and installation or repair
of systems outside the unit
How do you get warranty service?
To obtain warranty service in the United States
of America, call
1800 595-9511 for instructions regarding
where to return the Product. Before calling for
service, please check the user’s manual. A
check of the Product controls and features
may save you a service call.
Except as provided by applicable law, you as-
sume the risk of loss or damage during transit
and transportation and are responsible for
delivery or handling charges incurred in the
Warranty Statement & FCC Regulations
If the Product failure is not covered by this
limited warranty, or proof of purchase does
not meet the terms of this limited warranty,
VTECH will notify you and will request that
you authorize the cost of repair prior to any
further repair activity. You must pay for the
cost of repair and return shipping costs for
the repair of Products that are not covered by
this limited warranty.
What must you return with the Product
to get warranty service?
You must:
1. Return the entire original package and con-
tents including the Product to the VTECH ser-
vice location along with a description of the
malfunction or difficulty;
2. Include “valid proof of purchase” (sales re-
ceipt) identifying the Product purchased (Prod-
uct model) and the date of purchase or re-
ceipt; and
3. Provide your name, complete and correct mail-
ing address, and telephone number.
IF YOU PURCHASED YOUR TELEPHONE IN
CANADA:
Please call: 1-800-267-7377 for return autho-
rization
Ship to:
VTECH ELECTRONICS LTD.
200-7671 Alderbridge Way
Richmond, BC V6X 1Z9
Other Limitations
This warranty is the complete and exclu-
sive agreement between you and VTECH.
It supersedes all other written or oral com-
munications related to this Product.
VTECH provides no other warranties for
this product. The warranty exclusively de-
scribes all of VTECH’s responsibilities re-
garding the product. There are no other
express warranties. No one is authorized
to make modifications to this limited war-
ranty and you should not rely on any such
modification.
State Law Rights: This warranty gives you
specific legal rights, and you may also have
other rights which vary from state to state.
Limitations:
Implied warranties, including those of fit-
ness for a particular purpose and mer-
chantability (an unwritten warranty that
the product is fit for ordinary use) are lim-
ited to one year from date of purchase.
Some states do not allow limitations on
how long an implied warranty lasts, so the
above limitation may not apply to you.
In no event shall VTECH be liable for any
indirect, special, incidental, consequential,
or similar damages (including, but not lim-
ited to lost profits or revenue, inability to
use the product, or other associated
equipment, the cost of substitute equip-
ment, and claims by third parties) result-
ing from the use of this product.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages, so the above limitation or ex-
clusion may not apply to you.
Warranty Statement & FCC Regulations
FCC Regulations
The FCC requires that you connect your tele-
phone to the nationwide telephone network
through a modular telephone jack(USOC
RJ11C or RJ11W).
The REN is useful in determining the number of
devices you may connect to your telephone
line and still enable the devices to ring when
you receive a call. The general rule is that the
REN value should not exceed 5.0A total; how-
ever, contact your local telephone company
for the specific number in your area.
Please see the technical information
for VT1121 as below,
1. Size:
a.Handset:
205(L)×60(W)×52.5(H)mm{Max}
b.Base:
225(L)×72.5(W)×54(H)mm{Max}
2. Weight:
a. Handset: 215grams
b. Base: 220 grams
3. Power Requirement:
a. Battery: 4×(1.5V AA)
4. Memory:
a. Phone book (Directory):
3 one Touch Memeries and 10 Two Touch
Memeries
16 digits
b. CID:
50 CID Records(Min), 99 calls(Max) when all
records are 10 digits telephone no. and no
characters
13 digits
TECHNICAL SPECIFICATIONS
6
7
8
9 10
TELEPHONE OPERATION
transport of Product(s) to the service lo-
cation. VTECH will return repaired or re-
placed Product under this limited warranty
to you, transportation, delivery or handling
charges prepaid. VTECH assumes no risk
for damage or loss of the Product in tran-
sit.
To Change the Caller ID
To edit the Language, Area Code, Long Dis-
tance Code and Time/Date, press only the <
and> Buttons simultaneously for about 4 sec-
onds and then proceed as described above
to set the Language, Area Code, Long Dis-
tance Code and Time/Date. If you press the
DEL button at the same time as the < and >
buttons as described above for the initial set-
up, all previous CID settings will be deleted.
TELEPHONE OPERATION
Ringer Hi/Low Switch
1. “ Hi” Position: Ringer sounds to alert you to
incoming calls.
2. “Low” Position: Ringer sounds at a lower
level to minimize disturbance by incoming
calls.
Tone/Pulse Switch
1. The PULSE position is used if your local tele-
phone system only offers Pulse (rotary dial)
service or if Tone service is available but you
do not subscribe to it.
2. The TONE position is used if you subscribe
to Tone Dialing (DTMF) service. If you are
not certain what type of service you have,
check with your local telephone company.
Dialing Keys
To make a phone call, pick up the Handset.
When you hear the dial tone, dial out the
phone number you are calling using the keys
1 to 9 and 0. The number dialed will be shown
in the LCD panel. When your call is com-
pleted, hang up the handset.
Last Number Redial Button
The last number you have dialed remains in
a memory known as REDIAL memory. If you
call a number and receive a busy signal or
no answer, hang up the handset. When you
are ready to try the same call again, pick up
the handset and tap the REDIAL Button.
Please note that if you have made any other
calls in the meantime, only the last number
you called will be stored in the REDIAL
memory.
Flash Button
For Residential phone systems with “Call Wait-
ing Service”, instead of pressing the HOOK
SWITCH to pick up the other call, press the
FLASH Button. This will automatically send the
correct signal to the telephone company to
switch calls. The amount of time you hold the
FLASH Button down is not critical.
Elapsed Call Time
During a call, the LCD panel will display the
elapsed time of the current conversation.
CALLER ID OPERATION
RECEIVING A CALL
When you receive a call, your unit will display
the caller information sent by the telephone
company including:
* The caller’s name (if available)
* The caller’s telephone number (if available)
* The date and time of the call
* The Call Number to indicate the sequence of
the call
Note: When the memory is full and new calls
are received, previous messages will be
replaced by the new calls.
CALLER ID
This telephone is compatible with the “Caller
ID ” service. This service allows you to see
the name and/or phone number of a call .Note
that “Caller ID”and “Call Waiting”maybe offered
as two separate services. Make sure that your
telephone company offers this service and you
have subscribed to it in order to use this ser-
vice.
TELEPHONE OPERTION
11