Filter
Top Products
5
Getting Started
After the batteries are fully charged, follow the pro-
cedure below to register the handset to the base.
11
Select
MENU.
22
Highlight “Register,” then select OK. The screen
will display, "Search Base."
33
Press and hold
the LOCATE HANDSET button on
the base for at least 30 seconds.
44
The handset should beep to indicate the registra-
tion has completed. You will be prompted to
enter a name for the new handset (see your tele-
phone User’s Manual for help in entering names).
We strongly recommend that you give each
handset a distinctive name, to simplify paging and
intercom use.
55
Select OK to save the new handset name. The
name you enter will be displayed on screen when
the handset is idle, and in intercom paging lists.
Registering your new handset
Using your new handset
Your new expansion handset operates in the same
way as the handset supplied with your USB 7100 tele-
phone. For complete operating instructions, launch
the Vtech USB 7100 Phone Suite application on your
PC, then click the User Manual link on the right.
PAT
INTERCM MENU
NOT REGISTERED
MENU
Press MENU to begin
SEARCH BASE
1 > REGISTER
2 DEREGISTER
OK
HANDSET NAME
PAT_
OK
PAT
INTERCM MENU