Filter
Top Products
www.vtechphones.com
30
Telephone settings
• The handset will
not ring when a
call comes in if
ringer volume
is at the lowest
setting.
• Settings for the
handset and
the base must
be programmed
separately. For
example, when
you set the ringer
volume for the
handset, it will not
automatically set
in the base.
•
Key tone is preset
to ON.
Ringer volume
• With the handset or base in idle (off) mode, press MENU then
press or until RINGER VOLUME is shown.
• Press SEL. You will hear a sample of the ringer.
• Press , or a digit (0 through 6). You will hear a sample of
the new ringer volume and the volume bar will be increased or
decreased each time the setting is adjusted. At the lowest setting
the ringer will be turned off and the display will show:
- OR -
• With the handset or base in idle (off) mode, press
or of the
volume control will directly go to ringer volume menu.
• Press or to adjust the ringer volume.
Ringer tone
• With the handset or base in idle (off) mode, press MENU then
press or until RINGER TONE is displayed.
• Press SEL. Then press , or a digit (0 through 9). You will hear
a sample of the ring tone and you will see the number of that ring
tone, (0 - 9).
• Press
SEL to conrm.
Key tone
• With the handset or base in idle (off) mode, press MENU then
press or to until KEY TONE is displayed.
• Press
SEL. The current setting will be shown. Press or to
see ON or OFF. When set to on, the handset or base will emit a
beep whenever a key is pressed.
• When the desired option is shown, press
SEL.