Filter
Top Products
Telephone operation
Transfer/share a call using intercom
During a call, press MENU/SELECT twice to choose
>
Intercom. The
outside call is put on hold automatically.
If you have a two-handset system, your handset screen shows Calling
other handset.
If you have more than two handsets, your screen shows
INTERCOM TO:. Use the dialing keys to enter the destination handset
number. Your handset screen shows Calling handset X.
The destination handset rings and its screen shows Other handset is
calling or Handset X is calling.
To answer the intercom call, press /FLASH, or any of the dialing
keys (0-9, #, TONE ) on the destination handset. Both handsets now
show Intercom. You can now have a private conversation between the
system handsets.
3. From this intercom call, you have the following options:
To transfer the call, press MENU/SELECT twice on
the originating handset to choose
>
Transfer. The
originating handset screen shows Call transferred.
The destination handset is automatically connected
to the outside call.
To share the call, press MENU/SELECT on the originating handset and
then press / VOL or VOL/CID to highlight
>
Share call. Then press
MENU/SELECT. Both originating and destination handsets are connected
to the outside call.
To end the outside call, press OFF/CLEAR or place the handset in the
telephone base or charger. The call will not end until all handsets hang up.
1.
•
•
2.
•
•
4.
If you want to cancel an intercom call and reconnect to the outside call
before the destination handset answers, press /FLASH or OFF/CLEAR on
your originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, your originating
handset screen shows
Unable to call. Try again and reconnects to the
outside call automatically.
•
•
>Transfer
Share call
26