Filter
Top Products
2
Getting started
Telephone base and charger installation
Install the telephone base and charger(s) as shown below. The telephone
base is designed for tabletop use only.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL lter between the
telephone line cord and the telephone wall jack. The lter prevents noise and
caller ID problems caused by DSL interference. Contact your DSL service
provider for more information about DSL lters.
Use only the power adapters supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call 1 (800) 595-
9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or
oor mount position. The prongs are not designed to hold the plug in place if
it is plugged into a ceiling or an under-the-table/cabinet outlet.
•
•
Getting started
Telephone base
Telephone
line cord
Telephone
base power
adapter
Telephone
wall jack
If you have DSL
high speed Internet
service, a DSL
filter (not included)
is required.
Charger
adapter
Charger
Electrical outlet
not controlled by
a wall switch
Electrical outlet
not controlled by
a wall switch