Filter
Top Products
27
Multiple handset use
Intercom
Use the intercom feature for conversations between the handset and another
system device.
Press INT on the handset when not in use.
If you have only one handset, the handset displays
Calling base. The telephone base displays
HS 1 is calling.
If you have more than one handset, use the dialing
keys to enter a destination device number (7 for
the telephone base, or 1 to 5 for HANDSET 1 to
HANDSET 5). The handset displays Calling HS X or
Calling base. The destination device displays
HS X is calling.
To answer the intercom call at the telephone base, press or any dialing key
(0-9, or ). Both devices now show Intercom.
-OR-
To answer the intercom call with the destination handset, press , or any
dialing key (0-9, or ).
To end the intercom press OFF on the handset or places the handset back in the
telephone base, or press on the telephone base. Both devices display
Intercom ended.
You can cancel the intercom call before it is answered by pressing OFF.
If the destination device does not answer the intercom call within 100 seconds,
or if it is out of range, on a call, or accessing the answering system, your handset
displays Unable to call and then returns to idle mode.
You can press MUTE on the telephone base to temporarily silence the
intercom ringer.
Two pairs of intercom calls can be established at a time.
Answer an incoming call during an intercom call
If you receive an outside call during an intercom call, there is an alert tone.
To answer the call, press on the handset, or press twice on the telephone
base. The intercom call ends automatically.
To end the intercom call without answering the outside call, press OFF on the
handset, or press on the telephone base. The intercom call ends and the
telephone continues to ring.
1.
•
•
2.
3.
•
•
•
•
•
•
Intercom
ANS ON
ECO
ANS
ON
Intercom
10:01
AM
9
12/08