Filter
Top Products
Quick start guide
for model LS5146
Install the telephone base
Install the telephone base as shown below.
Battery installation and charging
Install the battery as shown below. For optimal
performance, charge the handset battery for at least
16 hours before use.
Press the tab and
slide the battery
compartment cover
downwards.
1.
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
Charge light
Pair your rst
Bluetooth cell phone
To pair and connect your rst Bluetooth cell phone:
Pre ss C EL L on t he
telephone base.
Press the YES softkey.
Set your cell phone to search
for or add new devices, then
press the NEXT softkey.
Once your cell phone nds
your VTech LS5146,
select
it and then enter the PIN
0000 on your cell phone.
When pairing is completed,
press the YES softkey on
the telephone base.
1.
2.
3.
4.
5.
Cellular setup
completed
VTech LS5146
in Discoverable Mode
PIN=0000
Set up Cellular
HELP
STOP
Insert the plug as
indicated. Make sure
it is plugged securely
and matches the
color-coded label
inside the battery
compartment.
2.
Place the battery
with the label
THIS SIDE UP facing
up and the wires
inside the battery
compartment.
3. Align the cover at
against the battery
compartment, then
slide it upwards until it
clicks into place.
4.
Charge the
handset by
placing it in the
telephone base.
The handset
charge light on
the handset
will be on when
charging.
5.
NOTES:
Use only the power adapter and battery
supplied with your VTech telephone.
For complete feature instructions, please refer
to your user’s manual.
1.
2.
Pair your rst
Bluetooth headset
To pair and connect your rst Bluetooth headset:
Press the MENU softkey on
the telephone base.
Press the UP and DOWN
N av Key s to h ig hl ig ht
Bluetooth, then press the
SELECT softkey.
Press the UP and DOWN
N av Key s to h ig hl ig ht
Set up Headset, then press
the SELECT softkey.
S et y o ur h ea d se t t o
discoverable mode, then
press the NEXT softkey.
Once the telephone base
nds your headset, select
it and then press the PAIR
softkey.
Enter your headset’s PIN
on the telephone base, then
press the DONE softkey.
The default PIN for most
headsets is 0000.
W h en t h e p a ir i ng i s
completed, press the YES
softkey on the telephone
base.
1.
2.
3.
4.
5.
6.
7.
Headset setup
completed
Pairing complete
Connect to
Headset ?
Set up Headset
NOYES
Cellular operation
requires Bluetooth
connection.
Set up Cellular?
NOYES
Set your Cellular to
search for devices,
then press NEXT
NEXT
Set up Cellular
Main Menu
Voice Mail
Intercom
Bluetooth
SELECT
Pairing complete
Connect to
Cellular ?
Set up Cellular
NOYES
Bluetooth
Set up Cellular
Set up Headset
Active Devices
SELECT
Set your Headset in
Discoverable mode,
then press NEXT
NEXT
Set up Headset
Enter PIN:
0000
Set up Headset
ERASE
HELP
DONE
Mary’s Headset
Headsets Found
FIND
PAIR
INFO
DSL lter (not included) required
if you have DSL high-speed
Internet service
Telephone wall jack
Electrical outlet
not controlled by
a wall switch
Power adapter
Telephone
line cord
Telephone base