Filter
Top Products
12
Basic Operation
Handset Operation
Conference Call
It is possible to establish a conference call be-
tween two handsets and the external line.
While the first handset is on an external call, the
second handset can press /FLASH or
SPEAKER, a conference will be automatically es-
tablished. Both handsets will show:
Base Operation
From the base unit, press the LOCATE HAND-
SET key to locate the handsets.
• With the handset in idle mode, press LOCATE
HANDSET. The handsets will beep and dis-
play:
• To end the page, press /FLASH,
SPEAKER, or any dial pad key (0-9, *, #) on
the handset, or press LOCATE HANDSET
at the base.
Call Forward
An external call can be forwarded between sys-
tem handsets.
• A handset (HS1), on an external call can
forward it to another handset (HSX).
Press INTERCOM on HSX, it will display:
• Enter the handset number you wish to
forward to. HSX will display:
• HSX can press /FLASH to answer the
call.
NOTE: If HSX does not respond in about 30
seconds, the external call will be returned to
HS1 and the display will show:
If the returned call is not answered within 30
seconds, the external call will end automatically.
NOTE: If HSX is out of range, or on an external
call, when HS1 attempts to intercom it, the display
of HS1 will show: