Filter
Top Products
45
Additional Information
Headset Operation
Your i 5858 handset is equipped with a 2.5mm headset jack for use with an optional
accessory headset for handsfree operation. If you choose to use the headset option, you
must obtain an optional accessory headset that is compatible with the i 5858. For best
results,
use
a
VTech
2.5mm
headset.
To purchase a headset, visit us on the web at www.vtechphones.com or call VTech
Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm headset, locate the headset jack on the i 5858 handset.
Connect the plug on the headset cord to the jack (under a small rubber flap) on the cordless
handset. The plug should fit securely. Do not force the connection.
NOTE:
Whenever a compatible headset is connected to
the cordless handset, the microphone on the
handset will be muted. This is done to limit the effect
of background noise.
Belt Clip
The i 5858 is also equipped with a detachable belt
clip. Align the pins on the inside edge of the clip
with the notches on the sides of the handset. The
belt clip should snap securely into place. Do not
force the connection.