Filter
Top Products
6
Getting Started
7
Getting Started
Setup
Battery Life
A fully charged battery provides an average talk time of about seven hours or standby
time of four days.
NOTE: Talk time and standby time may vary depending on operating conditions.
Battery Indicator
Ten minutes before the battery charge level gets too low to operate the handset, an empty
battery icon will start ashing, ve short tones are generated and a Low Battery message
is displayed.
If you continue to use the handset without charging or replacing the battery (spare
batteries purchased separately), the handset will turn off automatically when the battery
charge level is no longer sufcient to power up the handset, and the call will be dropped.
Charging the Handset Battery
After a low battery indication, place the handset in the charger and make sure the
CHARGING light turns on. With the exception of the rst charge, the battery typically
takes eight hours to fully charge.
NOTE: If you repeatedly get a low battery indication, even after eight hours of charging,
then the battery should be replaced.
As you register additional i 5808 handsets to your i 5858 or i 5871 system, they will
be assigned extension numbers in the following order: HANDSET 2, HANDSET 3,
HANDSET 4, and so forth.
Whenever a charged handset battery is installed, the handset will automatically begin
Searching for Base... (if previously registered), or it will prompt you to REGISTER
with the registration guide to register the new handset.
BEFORE USING YOUR HANDSET(S), CAREFULLY PEEL OFF THE PROTECTIVE
FILM COVERING THE DISPLAY.