Filter
Top Products
www.vtechphones.com
31
Answering system operation
• If the system
has less than
ve minutes
of recording
time left, the
remaining
time will be
announced.
• If
F is ashing
in the message
window,
memory is full.
You will have
to delete some
messages
before new ones
can be received.
• Only old
messages can
be deleted.
Messages can
only be deleted
after they are
played.
Message playback
• Press /PLAY/STOP to listen to messages. Press /PLAY/STOP to
stop playback.
• If you have new messages waiting, you will hear only the new message
(oldest rst). If there are no new messages, the system will play back
all messages (oldest rst).
• When playback begins, the total number of messages and the day and
time it was received will be announced.
Options during playback
• Press
/ /VOLUME to adjust the speaker volume.
• Press /SKIP to skip to the next message.
• Press /REPEAT to repeat the message currently playing. Press twice
to listen to the previous message.
• Press DELETE to delete the current message. The system will advance
to the next message.
Delete all messages
• When in idle mode,
press and hold DELETE to delete all old messages.
• The system will announce
“All old messages deleted.”
New message indication
• The message display counter will ash when there are new answering
system messages.
• If the new message alert tone is turned on, the telephone base will beep
every ten seconds when there are un-reviewed messages.
Delete your announcement
• While in idle mode, press
ANNC and the system will announce
“Announcement, press PLAY or
press R ECORD.”
• Press DELETE to delete, and the system will announce
“Announcement deleted.”