Filter
Top Products
8
Registration
Registering the i 5807 Handset for the first time
After charging, the screen on the Handset will display:
If your Base Unit is model number i 5866 or i 5867:
1) Find the Base ID Code on the underside of the
Base Unit.
2) Enter the 15-digit Base ID Code into the Handset. If you make a mis-
take, press the left NavKey to backspace or press the right softkey
to erase a character.
3) Press OK to complete the registration process.
If your Base Unit is model number i 5853 or i 5857, find the BASE ID Code (Base
must be OFF) and register the Handset by:
1) At the Base, press MENU.
2) Scroll down to DISPLAY BASE-ID, then press OK.
3) Enter the 15-digit Base ID Code into the Handset. If you make a
mistake, press the left NavKey to backpace or press the right softkey
to erase a character.
4) Press OK to complete the registration process.
NOTE: If the Handset, after charging, says Searching for Base..., press the NEW
softkey. Enter Base ID will now be displayed. Follow the steps above. Wait
approximately 15-60 seconds. You will hear confirmation beeps from the Base
and Handset. The newly registered Handset will now be assigned the lowest
extension number not previously assigned to a different system Handset (1 - 8).
If you do not enter the correct digit sequence, you will see Invalid Base ID! and
hear an error tone. Press the left NavKey to backspace or press the right
softkey
to erase a character, and carefully re-enter the Base ID Code
following the above directions.
Getting Started
NOTE: The 15-digit BASE ID Code may contain numbers and characters,
such as *. Make sure you carefully enter all 15 digits.