Filter
Top Products
www.vtechphones.com
42
Answering system
New message indication
The message display counter will ash when there are new answering system
messages.
If the new message alert tone is turned on, the telephone base will beep every
ten seconds when there are unreviewed messages.
Message playback
Press /PLAY/STOP to listen to messages.
Press /PLAY/STOP again to stop playback.
If you have new messages, you will hear only the new messages (oldest rst). If
there are no new messages, the system will play back all messages (oldest rst).
When playback begins, the total number of messages is announced, followed
by the day and time of the rst message to be played.
Options during playback
Press VOL+/ VOL- to adjust the speaker volume.to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message currently playing. Press /REPEAT
twice to listen to the previous message.
Press X/DELETE to delete the current message. The system will advance to
the next message.
1.
2.
•
•
•
•
If the memory is
full, the system will
answer after 10
rings and announce,
“Memory is full.
Enter the remote
access code.”
If the answering
system is off, the
system will answer
after 10 rings and
announce, “Please
enter your remote
access code.”
If the system has
less than ve
minutes of recording
time left, the
remaining time will
be announced.
If F is ashing in the
message window,
the memory is
full. You will have
to delete some
messages before
new ones can be
recorded.
•
•
•
•