VTech CS6529-16 Cordless Telephone User Manual


 
5
Telephone base overview
X/DELETE
Delete the playing message.
Press twice to delete
all previously reviewed
messages when the phone is
not in use.
Message window
Shows the number of messages, and other
information of the answering system or
telephone base.
IN USE light
Flashes when there is an
incoming call, or another
telephone sharing the
same line is in use.
Flashes when handsets
are being deregistered.
On when a handset is
in use.
On when the answering
system is answering a call.
On when a handset is
being registered.
FIND HANDSET
Press to page all system
handsets.
/SKIP
Skip to the next message.
/ PLAY/STOP
Play or stop playing messages.
ANS ON/OFF
Turn the answering system
on or off.
/REPEAT
Press to repeat a message.
Press twice to play the
previous message.
VOL
+ and
VOL
-
Adjust the volume during
message playback.
Adjust the telephone base
ringer volume when the
phone is not in use.
Using the menu
Press MENU when the phone is not in use.
Press or until the screen displays the desired feature menu.
Press SELECT.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks (*).
Settings menu Description Options
LCD language Set the screen display language. English*
Français
Español
Voicemail # Set the speed dial voicemail number. Voicemail #
-
Clr voicemail Turn off the voicemail indicators (see the note
below).
Reset VM Icon?
Key tone Set whether the handset beeps whenever a
key is pressed.
Key tone:On*
Key tone:Off
Home area code Set the home area code so that the caller ID
log stores only seven digits for local
telephone numbers.
Home area code
_ _ _
Dial mode Set the telephone to be touch-tone or pulse
dialing.
Touch-tone*
Pulse
The following are some of the telephone features you may wish to set. Refer to
Telephone settings in the online Complete user’s manual for complete instructions
on setting all telephone features.
Ringer volume (handset)
You can adjust the ringer volume level, or turn the ringer off.
Press MENU when the handset is not in use.
Scroll to Ringers and then press SELECT twice.
Press or to sample each volume level, then press SELECT to save.
When the ringer volume is set to Off, the handset still rings when you press
FIND HANDSET on the telephone base.
1.
2.
3.
1.
2.
3.
Use the Clr voicemail feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away
from home. The Clr voicemail feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.