Filter
Top Products
10
Using the menu
In the ringers menu, you can select the ringer tones and adjust the ringer volume
for incoming calls.
In the settings menu, you can change and edit the settings for LCD language,
voicemail indicators, key tone, date and time, home area code and dial mode.
Go to Answering system settings starting on page 35 for instructions on how
to modify the answering system settings with a system handset shown in the
table below.
Setting Page
Answer on/off 35
Announcement (play, record and delete) 36
Call screening 37
Number of rings 37
Remote access code 37
Message alert tone 38
Recording time 38
To enter the handset menu:
Press MENU/SELECT when the handset is not in use.
Press or until the screen displays the desired feature menu.
Press MENU/SELECT to enter that menu.
To return to the previous menu, press OFF/CANCEL.
To return to idle mode, press and hold OFF/CANCEL.
Ringer volume (telephone base)
Press /VOL or /VOL on the telephone base to adjust the ringer volume
when the telephone is not in use. When you set the ringer volume to zero, the
base ringer is off and the system announces, “Base ringer is off.”
1.
2.
3.
•
•
Telephone settings