VTech CS6429 Cordless Telephone User Manual


 
21
Intercom
Use the intercom feature for conversations between two handsets.
Press INT on your handset when not in use.
If you have two handsets, your handset shows
CALLING OTHER HANDSET.
If you have three or more handsets, your handset
shows INTERCOM TO: Use the dialing keys to select a
destination handset. Your handset shows
CALLING HANDSET X.
The destination handset rings and its screen shows
OTHER HANDSET IS CALLING when you have two
handsets, or HANDSET X IS CALLING when you have
three or more handsets.
To answer the intercom call, press /FLASH, , INT
or any dialing key (0-9, TONE or #) on the destination
handset. Both handsets now show INTERCOM.
To end an intercom call, press OFF/CANCEL or place the
handset back in the telephone base or charger. Both handsets now show
INTERCOM ENDED.
1.
2.
3.
You can cancel the intercom call before it is answered by pressing
OFF/CANCEL or INT on the originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, the originating
handset shows UNABLE TO CALL. TRY AGAIN and returns to
idle mode.
Press OFF/CANCEL or MUTE/DELETE on the destination handset to
temporarily silence the intercom ringer.
You can use two pairs of handsets on two intercom calls at a time. When
two pairs of handsets are used on intercom calls, use the fifth handset for an
outside call.
If there is an incoming call while the originating handset shows
INTERCOM TO:, the intercom request will be stopped and the screen will
show INCOMING CALL.
You can cancel the intercom call before it is answered by pressing
OFF/CANCEL or INT on the originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, the originating
handset shows UNABLE TO CALL. TRY AGAIN and returns to
idle mode.
Press OFF/CANCEL or MUTE/DELETE on the destination handset to
temporarily silence the intercom ringer.
You can use two pairs of handsets on two intercom calls at a time. When
two pairs of handsets are used on intercom calls, use the fifth handset for an
outside call.
If there is an incoming call while the originating handset shows
INTERCOM TO:, the intercom request will be stopped and the screen will
show INCOMING CALL.
Telephone operation
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
INTERCOM