VTech CS6419 Telephone User Manual


 
19
Join a call in progress
You can use up to two system handsets at a time on an outside call. You can
buy additional expansion handsets (CS6409) for this telephone base. You can
register up to five handsets to the telephone base.
To join a call:
When a handset is on a call, press /FLASH or on another handset.
Press OFF/CANCEL to exit the call. The call continues until all handsets hang up.
Find handset
Use this feature to find all system handsets.
To start the paging tone:
Press /FIND HANDSET on the telephone base. All idle
handsets ring and their screens show ** PAGING**.
To end the paging tone:
Press /FIND HANDSET again on the telephone base.
Press /FLASH, or any dialing key (0-9, TONE or #) on
the handset.
Place the handset in the telephone base or charger.
When you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that
handset is silenced but the paging tone continues on other handsets.
When you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that
handset is silenced but the paging tone continues on other handsets.
Telephone operation