VTech BS5872 Cordless Telephone User Manual


 
42
ADDITIONAL INFORMATION
Troubleshooting
Problem Suggestion
My handset does not
ring when I receive
a call.
• Make sure you have the ringer activated. Refer to the section(s) on ringer selection in this user’s
manual.
• Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack.
Make sure the power cord is plugged in.
• You may be too far from the base unit.
• Charge the battery in the handset for 16 hours. For optimum daily performance, return the handset
to its base when not in use.
• You may have too many extension phones on your telephone line to allow all of them to ring. Try
unplugging some of the other phones.
• The layout of your home or office might be limiting the operating range. Try moving the base to
another location, preferably on an upper floor.
• If the other phones in your home are having the issue, the problem is in your wiring or local service.
Contact your local telephone company (charges may apply).
• Test a working phone at the phone jack. If another phone has the same problem, the problem is
the phone jack. Contact your local telephone company (charges may apply).
• Other electronic products can cause interference with your cordless phone. Try installing your
phone as far away from these types of electronic devices as possible: wireless routers, radios,
radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers,
kitchen appliances and other cordless phones
• Your line cord might be malfunctioning. Try installing a new line cord.