Filter
Top Products
WHAT DOES OUR WARRANTY COVER?
• Any defect in material or workmanship.
FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
• One Year.
WHAT WILL VTECH DO?
• At our option, repair or replace your unit.
HOW DO I SEND MY UNIT, IN OR OUT OF WARRANTY?
• Call VTECH Electronics customer service for Return Authorization at: 1-800-595-9511
• Properly pack your unit. Include any cables & accessories which were originally provided with
the product. We recommend using the original carton and packing materials.
• Include in the package a copy of the sales receipt or other evidence of date of original purchase
(if the unit was purchased within the last twelve months.)
• Print your name and address, along with a description of the defect, and include this in the
package.
• Include payment for any service or repair not covered by the warranty, as determined by
VTECH Communications.
• In the US, ship the unit via UPS Insured, or equivalent to:
San Antonio Returns Center
1145 Coliseum Road
Department Vtech
San Antonio, TX 78219
VTECH Communications assumes no responsibility for units sent without prior Return Authorization.
WHAT DOES OUR WARRANTY NOT COVER?
• Batteries
• Damage from misuse, neglect, or acts of nature (lightning, floods, power surges. etc.)
• Products which may have been modified or incorporated into other products
• Products purchased outside the USA
• Products serviced by the owner or a service facility not expressly authorized by VTECH
Communications
• Products purchased more than 12 months from current date
HOW DOES STATE LAW RELATE TO THIS WARRANTY?
• This warranty gives you specific rights. You may also have other rights which vary from state to
state.
IF YOU PURCHASED YOUR TELEPHONE IN CANADA
Please call: 1-800-267-7377 for return authorization.
Ship to: VTECH ELECTRONICS LTD.
200-7671 ALDERBRIDGE WAY
RICHMOND, BC V6X 1Z9
TAKING CARE OF YOUR TELEPHONE
.
Your VT9119
cordless telephone contains
sophisticated electronic parts so it must be
treated with care.
Avoid rough treatment
Place the handset down gently. Save the
original packing materials to protect your
telephone if you ever need to ship it.
Avoid Water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install your
base unit near a sink, bathtub or shower.
Remember that electrical appliances can
cause serious injury if used when you are wet
or standing in water. If your base unit should
fall into water,
DO NOT RETRIEVE IT UNTIL YOU
UNPLUG THE POWER CORD AND TELEPHONE
LINE CORDS FROM THE WALL.
Then pull the
unit out by the unplugged cords.
Electrical Storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment.
For your own safety, use caution when using
electric appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing
that should retain its luster for many years.
Clean it only with a soft cloth slightly dampened
with water or a mild soap. Do not use excess
water or cleaning solvents of any kind.
This equipment complies with FCC AND IC REGULATIONS 15 and 68 of
the Federal Communications Commission (FCC) rules for the United
States. It also complies with regulations RSS-210 and CS-03 of Industry
Canada (IC).
A label is located on the underside of the base unit containing either
the FCC registration number and Ringer Equivalence Number (REN) or
the IC registration number and Load Number. You must, upon request,
provide this information to your local telephone company.
This equipment is compatible with inductively coupled hearing aids.
FCC Part 15
Warning:Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
The equipment has been tested and found to comply with part 15 of the
FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try and correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Part 68
The FCC requires that you connect your cordless telephone to the
nationwide telephone network through a modular telephone jack (USOC
RJ11C or RJ11W).
Your telephone company may discontinue your service if your equipment
causes harm to the telephone network. They will notify you in advance
of disconnection, if possible. During notification, you will be informed
of your right to file a complaint with the FCC.
If it is determined that your telephone equipment is malfunctioning, the
FCC requires that it not be used and that it be unplugged from the
modular jack until the problem has been corrected. Repairs to this
telephone equipment can only be made by the manufacturer or its
authorized agents or by others who may be authorized by the FCC. For
repair procedures, follow the instructions outlined under the VTECH
Limited Warranty.
WARRANTY STATEMENT
MAINTENANCE
TECHNICAL
SPECIFICATIONS
FREQUENCY CONTROL
Crystal Controlled Dual PLL Synthesizer
TRANSMIT FREQUENCY
Handset: 923.10 MHz to 927.75 MHz
Base: 902.3 MHz to 906.65 MHz
RECEIVE FREQUENCY
Handset: 902.3 MHz to 906.65 MHz
Base: 923.10 MHz to 927.75 MHz
NOMINAL EFFECTIVE RANGE
Maximum power allowed by FCC and IC.
Actual operating range may vary according to
environmental conditions at the time of use.
SIZE
Handset: 17.5cm x 5.5cm x 3.9cm
(L x W xT) maximum
(antenna excluded)
Base: 19.3cm x 14.8cm x 5.4cm
(L x W x T) maximum
(antenna excluded)
WEIGHT
Handset: 146 grams
Base: 283 grams
POWER REQUIREMENTS
Handset: Self-contained nickel-
cadmium rechargeable
battery supply, 3.6V nominal,
400mAh capacity.
Power Adapter: 9V DC @ 200mA
SPECIFICATIONS ARE TYPICAL AND
MAY CHANGE WITHOUT NOTICE.
FCC AND IC REGULATIONS
The REN is useful in determining the number of devices you may
connect to your telephone line and still enable the devices to ring when
you receive a call. The general rule is that the REN value should not
exceed 5.0 total; however, contact your local telephone company for
the specific number in your area.
IC (Industry Canada)
This telephone is registered for use in Canada.
Notice: The Industry Canada label identifies certified
equipment. This certification means that the equipment
meets certain telecommunications network, protective,
operational and safety requirements. Industry Canada
does not guarantee the equipment will operate to the
user’s satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company.The equipment must also be
installed using an acceptable method of connections. The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in situations.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
Caution:Users should not attempt to make such connections
themselves, but should contact appropriate electric
inspection authority, or electrician, as appropriate.
Notice: The REN assigned to this device denotes the number
of devices you may connect to the telephone loop
which is used by the device to prevent overloading.The
termination on a loop may consist of any combination
of devices subjected only to the requirement that the
sum of the REN does not exceed five(5.0).
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
12
13
14